lan.c

Go to the documentation of this file.

/* SPDX-License-Identifier: GPL-2.0-only */
 
#include <cbfs.h>
#include <types.h>
#include <arch/io.h>
#include <device/pci_ops.h>
#include <console/console.h>
#include <device/device.h>
#include <fmap.h>
#include <southbridge/intel/bd82x6x/pch.h>
#include "onboard.h"
 
static unsigned int search(char *p, u8 *a, unsigned int lengthp,
                           unsigned int lengtha)
{
        int i, j;
 
        /* Searching */
        for (j = 0; j <= lengtha - lengthp; j++) {
                for (i = 0; i < lengthp && p[i] == a[i + j]; i++)
                        ;
                if (i >= lengthp)
                        return j;
        }
        return lengtha;
}
 
static unsigned char get_hex_digit(u8 *offset)
{
        unsigned char retval = 0;
 
        retval = *offset - '0';
        if (retval > 0x09) {
                retval = *offset - 'A' + 0x0A;
                if (retval > 0x0F)
                        retval = *offset - 'a' + 0x0a;
        }
        if (retval > 0x0F) {
                printk(BIOS_DEBUG, "Error: Invalid Hex digit found: %c - 0x%02x\n",
                        *offset, *offset);
                retval = 0;
        }
 
        return retval;
}
 
static int get_mac_address(u32 *high_dword, u32 *low_dword,
                           u8 *search_address, u32 search_length)
{
        char key[] = "ethernet_mac";
        unsigned int offset;
        int i;
 
        offset = search(key, search_address, sizeof(key) - 1, search_length);
        if (offset == search_length) {
                printk(BIOS_DEBUG,
                       "Error: Could not locate '%s' in VPD\n", key);
                return 0;
        }
        printk(BIOS_DEBUG, "Located '%s' in VPD\n", key);
 
        offset += sizeof(key);  /* move to next character */
        *high_dword = 0;
 
        /* Fetch the MAC address and put the octets in the correct order to
         * be programmed.
         *
         * From RTL8105E_Series_EEPROM-Less_App_Note_1.1
         * If the MAC address is 001122334455h:
         * Write 33221100h to I/O register offset 0x00 via double word access
         * Write 00005544h to I/O register offset 0x04 via double word access
         */
 
        for (i = 0; i < 4; i++) {
                *high_dword |= (get_hex_digit(search_address + offset)
                                << (4 + (i * 8)));
                *high_dword |= (get_hex_digit(search_address + offset + 1)
                                << (i * 8));
                offset += 3;
        }
 
        *low_dword = 0;
        for (i = 0; i < 2; i++) {
                *low_dword |= (get_hex_digit(search_address + offset)
                               << (4 + (i * 8)));
                *low_dword |= (get_hex_digit(search_address + offset + 1)
                               << (i * 8));
                offset += 3;
        }
 
        return *high_dword | *low_dword;
}
 
static void program_mac_address(u16 io_base)
{
        void *search_address = NULL;
        size_t search_length = -1;
 
        /* Default MAC Address of A0:00:BA:D0:0B:AD */
        u32 high_dword = 0xD0BA00A0;    /* high dword of mac address */
        u32 low_dword = 0x0000AD0B;     /* low word of mac address as a dword */
 
        if (CONFIG(VPD)) {
                struct region_device rdev;
 
                if (fmap_locate_area_as_rdev("RO_VPD", &rdev) == 0) {
                        search_address = rdev_mmap_full(&rdev);
 
                        if (search_address != NULL)
                                search_length = region_device_sz(&rdev);
                }
        } else {
                search_address = cbfs_map("vpd.bin", &search_length);
        }
 
        if (search_address == NULL)
                printk(BIOS_ERR, "LAN: VPD not found.\n");
        else
                get_mac_address(&high_dword, &low_dword, search_address,
                                search_length);
 
        if (io_base) {
                printk(BIOS_DEBUG, "Realtek NIC io_base = 0x%04x\n", io_base);
                printk(BIOS_DEBUG, "Programming MAC Address\n");
 
                /* Disable register protection */
                outb(0xc0, io_base + 0x50);
                outl(high_dword, io_base);
                outl(low_dword, io_base + 0x04);
                outb(0x60, io_base + 54);
                /* Enable register protection again */
                outb(0x00, io_base + 0x50);
        }
}
 
void lan_init(void)
{
        u16 io_base = 0;
        struct device *ethernet_dev = NULL;
 
        /* Get NIC's IO base address */
        ethernet_dev = dev_find_device(NIC_VENDOR_ID,
                                       NIC_DEVICE_ID, 0);
        if (ethernet_dev != NULL) {
                io_base = pci_read_config16(ethernet_dev, 0x10) & 0xfffe;
 
                /*
                 * Battery life time - LAN PCIe should enter ASPM L1 to save
                 * power when LAN connection is idle.
                 * enable CLKREQ: LAN pci config space 0x81h=01
                 */
                pci_write_config8(ethernet_dev, 0x81, 0x01);
        }
 
        if (io_base) {
                /* Program MAC address based on VPD data */
                program_mac_address(io_base);
 
                /*
                 * Program NIC LEDS
                 *
                 * RTL8105E Series EEPROM-Less Application Note,
                 * Section 5.6 LED Mode Configuration
                 *
                 * Step1: Write C0h to I/O register 0x50 via byte access to
                 *        disable 'register protection'
                 * Step2: Write xx001111b to I/O register 0x52 via byte access
                 *        (bit7 is LEDS1 and bit6 is LEDS0)
                 * Step3: Write 0x00 to I/O register 0x50 via byte access to
                 *        enable 'register protection'
                 */
                outb(0xc0, io_base + 0x50);     /* Disable protection */
                outb((NIC_LED_MODE << 6) | 0x0f, io_base + 0x52);
                outb(0x00, io_base + 0x50);     /* Enable register protection */
        }
}