memory.c

Go to the documentation of this file.

/* SPDX-License-Identifier: GPL-2.0-only */
 
#include <baseboard/variants.h>
#include <gpio.h>
#include <soc/meminit.h>
#include <variant/gpio.h>
#include <fsp/api.h>
 
const struct lpddr4_swizzle_cfg baseboard_lpddr4_swizzle = {
        /* CH0_DQA[0:31] SoC pins -> U22 LPDDR4 module pins */
        .phys[LP4_PHYS_CH0A] = {
                /* DQA[0:7] pins of LPDDR4 module. */
                .dqs[LP4_DQS0] = { 6, 7, 5, 4, 3, 1, 0, 2 },
                /* DQA[8:15] pins of LPDDR4 module. */
                .dqs[LP4_DQS1] = { 12, 10, 11, 13, 14, 8, 9, 15 },
                /* DQB[0:7] pins of LPDDR4 module with offset of 16. */
                .dqs[LP4_DQS2] = { 16, 22, 23, 20, 18, 17, 19, 21 },
                /* DQB[7:15] pins of LPDDR4 module with offset of 16. */
                .dqs[LP4_DQS3] = { 30, 28, 29, 25, 24, 26, 27, 31 },
        },
        .phys[LP4_PHYS_CH0B] = {
                /* DQA[0:7] pins of LPDDR4 module. */
                .dqs[LP4_DQS0] = { 7, 3, 5, 2, 6, 0, 1, 4 },
                /* DQA[8:15] pins of LPDDR4 module. */
                .dqs[LP4_DQS1] = { 9, 14, 12, 13, 10, 11, 8, 15 },
                /* DQB[0:7] pins of LPDDR4 module with offset of 16. */
                .dqs[LP4_DQS2] = { 20, 22, 23, 16, 19, 17, 18, 21 },
                /* DQB[7:15] pins of LPDDR4 module with offset of 16. */
                .dqs[LP4_DQS3] = { 28, 24, 26, 27, 29, 30, 31, 25 },
        },
        .phys[LP4_PHYS_CH1A] = {
                /* DQA[0:7] pins of LPDDR4 module. */
                .dqs[LP4_DQS0] = { 2, 1, 6, 7, 5, 4, 3, 0 },
                /* DQA[8:15] pins of LPDDR4 module. */
                .dqs[LP4_DQS1] = { 11, 10, 8, 9, 12, 15, 13, 14 },
                /* DQB[0:7] pins of LPDDR4 module with offset of 16. */
                .dqs[LP4_DQS2] = { 17, 23, 19, 16, 21, 22, 20, 18 },
                /* DQB[7:15] pins of LPDDR4 module with offset of 16. */
                .dqs[LP4_DQS3] = { 31, 29, 26, 25, 28, 27, 24, 30 },
        },
        .phys[LP4_PHYS_CH1B] = {
                /* DQA[0:7] pins of LPDDR4 module. */
                .dqs[LP4_DQS0] = { 4, 3, 7, 5, 6, 1, 0, 2 },
                /* DQA[8:15] pins of LPDDR4 module. */
                .dqs[LP4_DQS1] = { 15, 9, 8, 11, 14, 13, 12, 10 },
                /* DQB[0:7] pins of LPDDR4 module with offset of 16. */
                .dqs[LP4_DQS2] = { 20, 23, 22, 21, 18, 19, 16, 17 },
                /* DQB[7:15] pins of LPDDR4 module with offset of 16. */
                .dqs[LP4_DQS3] = { 25, 28, 30, 31, 26, 27, 24, 29 },
        },
};
 
/*
 * The strings in the part_num field aren't necessarily the exact part
 * numbers used in all the designs. The reason is that the mosys userland
 * tool uses these strings for dumping more information. Different speed bins
 * could change in future systems, but the strings still need to match.
 */
static const struct lpddr4_sku skus[] = {
        /*
         * K4F6E304HB-MG - both logical channels While the parts
         * are listed at 16Gb there are 2 ranks per channel so indicate
         * the deneisty as 8Gb per rank.
         */
        [0] = {
                .speed = LP4_SPEED_2400,
                .ch0_rank_density = LP4_8Gb_DENSITY,
                .ch1_rank_density = LP4_8Gb_DENSITY,
                .ch0_dual_rank = 1,
                .ch1_dual_rank = 1,
                .part_num = "K4F6E304HB-MGCJ",
        },
        /* K4F8E304HB-MG - both logical channels  */
        [1] = {
                .speed = LP4_SPEED_2400,
                .ch0_rank_density = LP4_8Gb_DENSITY,
                .ch1_rank_density = LP4_8Gb_DENSITY,
                .part_num = "K4F8E304HB-MGCJ",
        },
        /*
         * MT53B512M32D2NP - both logical channels. While the parts
         * are listed at 16Gb there are 2 ranks per channel so indicate
         * the deneisty as 8Gb per rank.
         */
        [2] = {
                .speed = LP4_SPEED_2400,
                .ch0_rank_density = LP4_8Gb_DENSITY,
                .ch1_rank_density = LP4_8Gb_DENSITY,
                .ch0_dual_rank = 1,
                .ch1_dual_rank = 1,
                .part_num = "MT53B512M32D2NP",
        },
        /* MT53B256M32D1NP - both logical channels */
        [3] = {
                .speed = LP4_SPEED_2400,
                .ch0_rank_density = LP4_8Gb_DENSITY,
                .ch1_rank_density = LP4_8Gb_DENSITY,
                .part_num = "MT53B256M32D1NP",
        },
        /*
         * H9HCNNNBPUMLHR - both logical channels. While the parts
         * are listed at 16Gb there are 2 ranks per channel so indicate the
         * density as 8Gb per rank.
         */
        [4] = {
                .speed = LP4_SPEED_2400,
                .ch0_rank_density = LP4_8Gb_DENSITY,
                .ch1_rank_density = LP4_8Gb_DENSITY,
                .ch0_dual_rank = 1,
                .ch1_dual_rank = 1,
                .part_num = "H9HCNNNBPUMLHR",
        },
        /* H9HCNNN8KUMLHR - both logical channels */
        [5] = {
                .speed = LP4_SPEED_2400,
                .ch0_rank_density = LP4_8Gb_DENSITY,
                .ch1_rank_density = LP4_8Gb_DENSITY,
                .part_num = "H9HCNNN8KUMLHR",
        },
        /* MT53E512M32D2NP - both logical channels */
        [6] = {
                .speed = LP4_SPEED_2400,
                .ch0_rank_density = LP4_16Gb_DENSITY,
                .ch1_rank_density = LP4_16Gb_DENSITY,
                .part_num = "MT53E512M32D2NP",
        },
        /* K4F6E3S4HM-MGCJ - both logical channels  */
        [7] = {
                .speed = LP4_SPEED_2400,
                .ch0_rank_density = LP4_16Gb_DENSITY,
                .ch1_rank_density = LP4_16Gb_DENSITY,
                .part_num = "K4F6E3S4HM-MGCJ",
        },
        /* K4F8E3S4HD-MGCL - both logical channels  */
        [8] = {
                .speed = LP4_SPEED_2400,
                .ch0_rank_density = LP4_8Gb_DENSITY,
                .ch1_rank_density = LP4_8Gb_DENSITY,
                .part_num = "K4F8E3S4HD-MGCL",
        },
        /* NT6AN256T32AV-J2 - both logical channels */
        [9] = {
                .speed = LP4_SPEED_2400,
                .ch0_rank_density = LP4_8Gb_DENSITY,
                .ch1_rank_density = LP4_8Gb_DENSITY,
                .part_num = "NT6AN256T32AV-J2",
        },
};
 
static const struct lpddr4_cfg lp4cfg = {
        .skus = skus,
        .num_skus = ARRAY_SIZE(skus),
        .swizzle_config = &baseboard_lpddr4_swizzle,
};
 
const struct lpddr4_cfg * __weak variant_lpddr4_config(void)
{
        return &lp4cfg;
}
 
size_t __weak variant_memory_sku(void)
{
        gpio_t pads[] = {
                [3] = MEM_CONFIG3, [2] = MEM_CONFIG2,
                [1] = MEM_CONFIG1, [0] = MEM_CONFIG0,
        };
 
        /* Need internal pullups enabled as only pulldown stuffing options
         * exist. */
        return gpio_pullup_base2_value(pads, ARRAY_SIZE(pads));
}
 
uint8_t fsp_memory_mainboard_version(void)
{
        return 1;
}