gpio.c

Go to the documentation of this file.

/* SPDX-License-Identifier: GPL-2.0-or-later */
 
#include <intelblocks/gpio.h>
#include <intelblocks/pcr.h>
#include <soc/pcr_ids.h>
#include <soc/pmc.h>
 
static const struct reset_mapping rst_map[] = {
        { .logical = PAD_CFG0_LOGICAL_RESET_RSMRST, .chipset = 0U << 30 },
        { .logical = PAD_CFG0_LOGICAL_RESET_DEEP, .chipset = 1U << 30 },
        { .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 },
};
 
static const struct reset_mapping rst_map_com0[] = {
        { .logical = PAD_CFG0_LOGICAL_RESET_PWROK, .chipset = 0U << 30 },
        { .logical = PAD_CFG0_LOGICAL_RESET_DEEP, .chipset = 1U << 30 },
        { .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 },
        { .logical = PAD_CFG0_LOGICAL_RESET_RSMRST, .chipset = 3U << 30 },
};
 
/*
 * The GPIO driver for Elkhartlake on Windows/Linux expects 32 GPIOs per pad
 * group, regardless of whether or not there is a physical pad for each
 * exposed GPIO number.
 *
 * This results in the OS having a sparse GPIO map, and devices that need
 * to export an ACPI GPIO must use the OS expected number.
 *
 * Not all pins are usable as GPIO and those groups do not have a pad base.
 *
 * This layout matches the Linux kernel pinctrl map for MCC at:
 * linux/drivers/pinctrl/intel/pinctrl-elkhartlake.c
 */
static const struct pad_group ehl_community0_groups[] = {
        INTEL_GPP_BASE(GPP_B0, GPP_B0, GPP_B23, 0),             /* GPP_B */
        INTEL_GPP(GPP_B0, GPIO_RSVD_0, GPIO_RSVD_1),
        INTEL_GPP_BASE(GPP_B0, GPP_T0, GPP_T15, 32),            /* GPP_T */
        INTEL_GPP_BASE(GPP_B0, GPP_G0, GPIO_RSVD_2, 64),        /* GPP_G */
};
 
static const struct pad_group ehl_community1_groups[] = {
        INTEL_GPP_BASE(GPP_V0, GPP_V0, GPP_V15, 96),            /* GPP_V */
        INTEL_GPP_BASE(GPP_V0, GPP_H0, GPP_H23, 128),           /* GPP_H */
        INTEL_GPP_BASE(GPP_V0, GPP_D0, GPIO_RSVD_3, 160),       /* GPP_D */
        INTEL_GPP_BASE(GPP_V0, GPP_U0, GPP_U19, 192),           /* GPP_U */
        INTEL_GPP(GPP_V0, GPIO_RSVD_4, GPIO_RSVD_7),
        INTEL_GPP_BASE(GPP_V0, VGPIO_0, VGPIO_39, 224),         /* VGPIO */
};
 
/* This community is not visible to the OS */
static const struct pad_group ehl_community2_groups[] = {
        INTEL_GPP(GPD0, GPD0, GPIO_RSVD_12),                    /* GPD */
};
 
static const struct pad_group ehl_community3_groups[] = {
        INTEL_GPP(GPIO_RSVD_13, GPIO_RSVD_13, GPIO_RSVD_29),
        INTEL_GPP_BASE(GPIO_RSVD_13, GPP_S0, GPP_S1, 288),      /* GPP_S */
        INTEL_GPP_BASE(GPIO_RSVD_13, GPP_A0, GPP_A23, 320),     /* GPP_A */
        INTEL_GPP(GPIO_RSVD_13, VGPIO_USB_0, VGPIO_USB_3),
};
 
static const struct pad_group ehl_community4_groups[] = {
        INTEL_GPP_BASE(GPP_C0, GPP_C0, GPP_C23, 352),           /* GPP_C */
        INTEL_GPP_BASE(GPP_C0, GPP_F0, GPP_F23, 384),           /* GPP_F */
        INTEL_GPP(GPP_C0, GPIO_RSVD_30, GPIO_RSVD_36),
        INTEL_GPP_BASE(GPP_C0, GPP_E0, GPP_E23, 416),           /* GPP_E */
};
 
static const struct pad_group ehl_community5_groups[] = {
        INTEL_GPP_BASE(GPP_R0, GPP_R0, GPP_R7, 448),            /* GPP_R */
};
 
static const struct pad_community ehl_communities[TOTAL_GPIO_COMM] = {
        /* GPP B, T, G */
        [COMM_0] = {
                .port = PID_GPIOCOM0,
                .first_pad = GPIO_COM0_START,
                .last_pad = GPIO_COM0_END,
                .num_gpi_regs = NUM_GPIO_COM0_GPI_REGS,
                .pad_cfg_base = PAD_CFG_BASE,
                .host_own_reg_0 = HOSTSW_OWN_REG_0,
                .gpi_int_sts_reg_0 = GPI_INT_STS_0,
                .gpi_int_en_reg_0 = GPI_INT_EN_0,
                .gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
                .gpi_smi_en_reg_0 = GPI_SMI_EN_0,
                .gpi_nmi_sts_reg_0 = GPI_NMI_STS_0,
                .gpi_nmi_en_reg_0 = GPI_NMI_EN_0,
                .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
                .name = "GPP_BTG",
                .acpi_path = "\\_SB.PCI0.GPIO",
                .reset_map = rst_map_com0,
                .num_reset_vals = ARRAY_SIZE(rst_map_com0),
                .groups = ehl_community0_groups,
                .num_groups = ARRAY_SIZE(ehl_community0_groups),
        },
        /* GPP V, H, D, U, VGPIO */
        [COMM_1] = {
                .port = PID_GPIOCOM1,
                .first_pad = GPIO_COM1_START,
                .last_pad = GPIO_COM1_END,
                .num_gpi_regs = NUM_GPIO_COM1_GPI_REGS,
                .pad_cfg_base = PAD_CFG_BASE,
                .host_own_reg_0 = HOSTSW_OWN_REG_0,
                .gpi_int_sts_reg_0 = GPI_INT_STS_0,
                .gpi_int_en_reg_0 = GPI_INT_EN_0,
                .gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
                .gpi_smi_en_reg_0 = GPI_SMI_EN_0,
                .gpi_nmi_sts_reg_0 = GPI_NMI_STS_0,
                .gpi_nmi_en_reg_0 = GPI_NMI_EN_0,
                .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
                .name = "GPP_VHDU",
                .acpi_path = "\\_SB.PCI0.GPIO",
                .reset_map = rst_map,
                .num_reset_vals = ARRAY_SIZE(rst_map),
                .groups = ehl_community1_groups,
                .num_groups = ARRAY_SIZE(ehl_community1_groups),
        },
        /* GPD */
        [COMM_2] = {
                .port = PID_GPIOCOM2,
                .first_pad = GPIO_COM2_START,
                .last_pad = GPIO_COM2_END,
                .num_gpi_regs = NUM_GPIO_COM2_GPI_REGS,
                .pad_cfg_base = PAD_CFG_BASE,
                .host_own_reg_0 = HOSTSW_OWN_REG_0,
                .gpi_int_sts_reg_0 = GPI_INT_STS_0,
                .gpi_int_en_reg_0 = GPI_INT_EN_0,
                .gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
                .gpi_smi_en_reg_0 = GPI_SMI_EN_0,
                .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
                .name = "GPD",
                .acpi_path = "\\_SB.PCI0.GPIO",
                .reset_map = rst_map,
                .num_reset_vals = ARRAY_SIZE(rst_map),
                .groups = ehl_community2_groups,
                .num_groups = ARRAY_SIZE(ehl_community2_groups),
        },
        /* GPP S, A */
        [COMM_3] = {
                .port = PID_GPIOCOM3,
                .first_pad = GPIO_COM3_START,
                .last_pad = GPIO_COM3_END,
                .num_gpi_regs = NUM_GPIO_COM3_GPI_REGS,
                .pad_cfg_base = PAD_CFG_BASE,
                .host_own_reg_0 = HOSTSW_OWN_REG_0,
                .gpi_int_sts_reg_0 = GPI_INT_STS_0,
                .gpi_int_en_reg_0 = GPI_INT_EN_0,
                .gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
                .gpi_smi_en_reg_0 = GPI_SMI_EN_0,
                .gpi_nmi_sts_reg_0 = GPI_NMI_STS_0,
                .gpi_nmi_en_reg_0 = GPI_NMI_EN_0,
                .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
                .name = "GPP_SA",
                .acpi_path = "\\_SB.PCI0.GPIO",
                .reset_map = rst_map,
                .num_reset_vals = ARRAY_SIZE(rst_map),
                .groups = ehl_community3_groups,
                .num_groups = ARRAY_SIZE(ehl_community3_groups),
        },
        /* GPP C, F, E */
        [COMM_4] = {
                .port = PID_GPIOCOM4,
                .first_pad = GPIO_COM4_START,
                .last_pad = GPIO_COM4_END,
                .num_gpi_regs = NUM_GPIO_COM4_GPI_REGS,
                .pad_cfg_base = PAD_CFG_BASE,
                .host_own_reg_0 = HOSTSW_OWN_REG_0,
                .gpi_int_sts_reg_0 = GPI_INT_STS_0,
                .gpi_int_en_reg_0 = GPI_INT_EN_0,
                .gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
                .gpi_smi_en_reg_0 = GPI_SMI_EN_0,
                .gpi_nmi_sts_reg_0 = GPI_NMI_STS_0,
                .gpi_nmi_en_reg_0 = GPI_NMI_EN_0,
                .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
                .name = "GPP_CFE",
                .acpi_path = "\\_SB.PCI0.GPIO",
                .reset_map = rst_map,
                .num_reset_vals = ARRAY_SIZE(rst_map),
                .groups = ehl_community4_groups,
                .num_groups = ARRAY_SIZE(ehl_community4_groups),
        },
        /* GPP R*/
        [COMM_5] = {
                .port = PID_GPIOCOM5,
                .first_pad = GPIO_COM5_START,
                .last_pad = GPIO_COM5_END,
                .num_gpi_regs = NUM_GPIO_COM5_GPI_REGS,
                .pad_cfg_base = PAD_CFG_BASE,
                .host_own_reg_0 = HOSTSW_OWN_REG_0,
                .gpi_int_sts_reg_0 = GPI_INT_STS_0,
                .gpi_int_en_reg_0 = GPI_INT_EN_0,
                .gpi_smi_sts_reg_0 = GPI_SMI_STS_0,
                .gpi_smi_en_reg_0 = GPI_SMI_EN_0,
                .gpi_nmi_sts_reg_0 = GPI_NMI_STS_0,
                .gpi_nmi_en_reg_0 = GPI_NMI_EN_0,
                .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP,
                .name = "GPP_RR",
                .acpi_path = "\\_SB.PCI0.GPIO",
                .reset_map = rst_map,
                .num_reset_vals = ARRAY_SIZE(rst_map),
                .groups = ehl_community5_groups,
                .num_groups = ARRAY_SIZE(ehl_community5_groups),
        }
};
 
const struct pad_community *soc_gpio_get_community(size_t *num_communities)
{
        *num_communities = ARRAY_SIZE(ehl_communities);
        return ehl_communities;
}
 
const struct pmc_to_gpio_route *soc_pmc_gpio_routes(size_t *num)
{
        static const struct pmc_to_gpio_route routes[] = {
                { PMC_GPP_B, GPP_B },
                { PMC_GPP_T, GPP_T },
                { PMC_GPP_D, GPP_D },
                { PMC_GPP_A, GPP_A },
                { PMC_GPP_R, GPP_R },
                { PMC_GPP_V, GPP_V },
                { PMC_GPD, GPD },
                { PMC_GPP_H, GPP_H },
                { PMC_GPP_U, GPP_U },
                { PMC_VGPIO, VGPIO },
                { PMC_GPP_F, GPP_F },
                { PMC_GPP_C, GPP_C },
                { PMC_GPP_E, GPP_E },
                { PMC_GPP_G, GPP_G },
                { PMC_GPP_S, GPP_S }
        };
 
        *num = ARRAY_SIZE(routes);
        return routes;
}